Speed Adjustment Mode: more intelligent multiple-scenarios usage
About
After more than 7 years of research and thousands of hours of testing, Harvey has succeeded in developing the revolutionary dust collectors–the GYRO AIR® Dust Processors G-800 and G-1000. Unlike any other dust collectors, the GYRO AIR® G-800 and G-1000 separate 99.7% of dust particles from the air by centrifugal force. Only 0.3% of the dust finally enters the HEPA Filters. This patented technology substantially reduces the clogging of dust particles in the filters while greatly increasing the efficiency of the dust collection. The GYRO AIR® technology coupled with its unique aerodynamic design, allows the G-800 and G-1000 to keep a high performance of dust collection consistently at 7 x 24 industrial operations without maintenance and deliver a super clean emission of 0.05 mg/m³. The GYRO AIR® Dust Processors have completely overturned the current perceptions of traditional dust collectors. With its unique industrial design, the GYRO AIR® has a high efficiency blower, an intelligent variable speed control and monitoring system, low noise level (61-72 dB(A)), minimal vibration, compact size and is easy to maintain. The GYRO AIR® Dust Processor is a dream come true for users in metal working, woodworking, composite machining, stone cutting, polishing, and other operations.
Separates Up to 99.7% of Dust
Particles from the Air Before Filtration
Unique GYRO AIR® technology
Strong Suction Capacity
Max. Air Flow: 1300 CFM Max. Static pressure: 21 inch water Max. Air Flow: 1600 CFM Max. Static pressure: 25 inch water
Low Noise Level
Super quiet (61-72 dB(A)
Unique Flow Cruise
Automatic adjustment for consistent air flow
Wireless Synchro-control
Synchronize start/stop of source equipment
Extremely Clean Emission
HEPA grade filter with an emission cleanliness level of 0.05 mg/m³
Certifications
CE Certified for Health, Safety and Environmental
Easy Maintenance
Tool-less detachable filters
Less Clogging of Filter
The GYRO AIR® technology efficiently separates 99.7% of dust particles from the air before filtration, providing the benefit of a lower load on the filters resulting in a longer filter life.
Intelligent Control
Real time monitoring for dust height in the bin, filter clogging and motor status. It also has intelligent automatic filter cleaning, intelligent wireless linkage to source machine, wireless remote control, and a timer for delayed automatic air cleaning.
Remarkable Designs and
Low-cost Installation
The GYRO AIR® is equipped with heavy duty casters so it can be positioned near the dust source if duct work is not needed or wanted in your shop.
Application Scenarios
GYRO AIR® G-800 and G-1000 are proven to be able to handle above 9 kinds of particles or dust (depending on application scenarios, different filters can be chosen)
Concrete
Wood
Plastic
Flour
Metal
Brick
Graphite
Chalk
Welding fumes
Rubber/Leather
Carbon fibers / fibreglass
Easy Maintenance
Both the replacement of the filters and the cleaning of the dust bins can be unpleasant on a traditional dust collection system. The GYRO AIR® has simplified this process:
The removal of the filters is easier by loosening the locking knob of the filter and pulling out the whole filter assembly with no tools needed. The dust bin liner is absorbed on the inner wall of the bin by negative pressure so there is no need to support the liner. The dust bin can be pulled out easily for replacing the liners with a quick release wrench.
Wireless Control
For convenience, the GYRO AIR ® is equipped with an easy to use wireless remote control to start or stop the unit within a work area of 20 meters. After an initial set-up, the wireless synchro-control, will automatically start and stop the GYRO AIR ® through WIFI with the equipment it’s hooked up to for dust collection.
Friendly Operation Experience
Presentation for Main Interface of G-800’s and G-1000’s Control Panel
Intelligent Dust Cleaning
In order to ensure the fixed flow and wind speed, the GYRO AIR® is equipped with an intelligent dust cleaning system. Once the filter clogging is detected in running, the machine will clean the filter by high-pressure air to ensure that the filter is not clogged. Manual dust cleaning can be performed anytime to ensure the cleanliness of the filter.
Speed Adjustment Mode
and Flow Cruise Mode
The GYRO AIR® Dust Collector can be connected to multiple units; In order to ensure the same dust collecting capacity, you can choose the flow cruise mode. The GYRO AIR® dust collector adopts the Siemens VFD variable speed, which ensures the stable output of power to the motor causing it to run at a high efficiency without overload. The speed adjustment mode allows the user to adjust the speed according to the number of units being used with the GYRO AIR®, whether it be a single unit or multiple units. The speed adjustment has the capacity to meet different needs of dust collecting while saving energy.
