Industrial Grade Dust

Flow Cruise Mode: stable suction capability

Speed Adjustment Mode: more intelligent multiple-scenarios usage


After more than 7 years of research and thousands of hours of testing, Harvey has succeeded in developing the revolutionary dust collectors–the GYRO AIR® Dust Processors G-800 and G-1000.
Unlike any other dust collectors, the GYRO AIR® G-800 and G-1000 separate 99.7% of dust particles from the air by centrifugal force. Only 0.3% of the dust finally enters the HEPA Filters. This patented technology substantially reduces the clogging of dust particles in the filters while greatly increasing the efficiency of the dust collection. The GYRO AIR® technology coupled with its unique aerodynamic design, allows the G-800 and G-1000 to keep a high performance of dust collection consistently at 7 x 24 industrial operations without maintenance and deliver a super clean emission of 0.05 mg/m³.
The GYRO AIR® Dust Processors have completely overturned the current perceptions of traditional dust collectors. With its unique industrial design, the GYRO AIR® has a high efficiency blower, an
intelligent variable speed control and monitoring system, low noise level (61-72 dB(A)), minimal vibration, compact size and is easy to maintain.
The GYRO AIR® Dust Processor is a dream come true for users in metal working, woodworking, composite machining, stone cutting, polishing, and other operations.

Make Your Life Much Better!​

Features and Benefits

Separates Up to 99.7% of Dust Particles from the Air Before Filtration

Unique GYRO AIR® technology

Strong Suction Capacity

Max. Air Flow: 1300 CFM
Max. Static pressure: 21 inch water
Max. Air Flow: 1600 CFM
Max. Static pressure: 25 inch water

Low Noise Level

Super quiet (61-72 dB(A)

Unique Flow Cruise

Automatic adjustment for consistent air flow

Wireless Synchro-control

Synchronize start/stop of source equipment

Extremely Clean Emission

HEPA grade filter with an emission cleanliness level of 0.05 mg/m³


CE Certified for Health, Safety and Environmental

Easy Maintenance

Tool-less detachable filters

Less Clogging of Filter

The GYRO AIR® technology efficiently separates 99.7% of dust particles from the air before filtration, providing the benefit of a lower load on the filters resulting in a longer filter life.

Intelligent Control

Real time monitoring for dust height in the bin, filter clogging and motor status. It also has intelligent automatic filter cleaning, intelligent wireless linkage to source machine, wireless remote control, and a timer for delayed automatic air cleaning.

Remarkable Designs and Low-cost Installation

The GYRO AIR® is equipped with heavy duty casters so it can be positioned near the dust source if duct work is not needed or wanted in your shop.

Application Scenarios

GYRO AIR® G-800 and G-1000 are proven to be able to handle above 9 kinds of particles or dust (depending on application scenarios, different filters can be chosen)









Welding fumes


Carbon fibers / fibreglass

Easy Maintenance

Both the replacement of the filters and the cleaning of the dust bins can be unpleasant on a traditional dust collection system. The GYRO AIR® has simplified this process:

The removal of the filters is easier by loosening the locking knob of the filter and pulling out the whole filter assembly with no tools needed.
The dust bin liner is absorbed on the inner wall of the bin by negative pressure so there is no need to support the liner. The dust bin can be pulled out easily for replacing the liners with a quick release wrench.

Wireless Control

For convenience, the GYRO AIR ® is equipped with an easy to use wireless remote control to start or stop the unit within a work area of 20 meters.
After an initial set-up, the wireless synchro-control, will automatically start and stop the GYRO AIR ® through WIFI with the equipment it’s hooked up to for dust collection.

Friendly Operation Experience

Presentation for Main Interface of G-800’s and G-1000’s Control Panel

Intelligent Dust Cleaning

In order to ensure the fixed flow and wind speed, the GYRO AIR® is equipped with an intelligent dust cleaning system. Once the filter clogging is detected in running, the machine will clean the filter by high-pressure air to ensure that the filter is not clogged.
Manual dust cleaning can be performed anytime to ensure the cleanliness of the filter.

Speed Adjustment Mode and Flow Cruise Mode

The GYRO AIR® Dust Collector can be connected to multiple units;
In order to ensure the same dust collecting capacity, you can choose the flow cruise mode. The GYRO AIR® dust collector adopts the Siemens VFD variable speed, which ensures the stable output of power to the motor causing it to run at a high efficiency without overload.
The speed adjustment mode allows the user to adjust the speed according to the number of units being used with the GYRO AIR®, whether it be a single unit or multiple units. The speed adjustment has the capacity to meet different needs of dust collecting while saving energy.


Model Number



North America

Europe, Asia


United Kingdom

Item No.






Power Supply

200-240 V, 60 Hz

200-240 V, 50 Hz

Single Phase

Main Motor

3 HP

2.2 kW

Inverter Type

Siemens V20

Dimensions & Weights

Overall Dimension

65-1/8 x 34-5/8 x 43-1/2 in.

1655 x 880 x 1100 mm

Packing Size

70-7/8 x 39-1/2 x 51-1/2 in.

1800 x 1000 x 1310 mm

Net Weight/Gross Weight

605/685 lbs

275/310 kg


Inlet Size


Φ150 mm and Φ125 mm

Max. Air Flow

1300 CFM

2200 m³/h

Max. Static Pressure

21 inch water

5200 Pa



2500 Pa @ Φ125 mm

Blower Speed

2400-4200 RPM

2400-4200 RPM

Filter Efficiency

99.95% @ 0.3 μm

99.95% @ 0.3 μm


0.05 mg/m³

0.05 mg/m³

Filter Area

86 SF

8 m²

Number of Filters



Noise Level

61-72 dB(A)

61-72 dB(A)

Dustbin Capacity

37 Gal

140 L